Solutii profesionale de
proiectare si printare 3D
pentru industrie

SERVICII

Proiectare si printare 3D pentru industrie

Executia este realizata cu ajutorul imprimanei 3D profesionala Stratasys F370 care are o precizie ridicata, realizand astfel piese la un inalt nivel calitativ.

Inchiriere nacela

Oferim servicii de inchiriere nacela Hinowa pentru lucrari la inaltime, in siguranta.

Frezare CNC de precizie

Executia este realizata cu ajutorul masinilor de tip CNC care au o precizie ridicata, realizand astfel piese la un inalt nivel calitativ.

Servicii integrate

Servicii integrate in domeniul prelucrarilor pe masini CNC, constructiilor sudate, masurarii, controlului si analizelor tehnice.

Prelucrari mecanice

Prelucram in conditii excelente diverse materiale, precum: inox, oteluri, aliate, aluminiu, alama, piese turnate si mase plastice tehnice.

Strunjire CNC de precizie

Echipamentele performante de care dispunem ne permit sa realizam operatiuni complexe de gaurire, filetare si/sau degrosare.

Proiectare asistata

Asiguram asistenta in proiectare piese pentru procesul de executie CNC si oferim servicii de consultanta specializata in acest domeniu.

Protejare si tratare

Oferim posibilitatea protejarii si tratarii suprafetelor prin: sablare, vopsire, eloxare, zincare, nichelare, brunare sau calire.

Service utilaje CNC

Servicii de reparare, mentenanta si verificare echipamente masini unelte cu comanda numerica CNC.

Despre_noi

DESPRE

Compania Alvi TechniK SRL si-a inceput activitatea in anul 2014 prin programul de stimulare a infiintarii si dezvoltarii microintreprinderilor de catre intreprinzatorii tineri, oferind solutii de proiectare si printare 3D pentru industrie, servicii de inchiriere nacela pentru lucrari la inaltime, servicii integrate in domeniul prelucrarilor prin aschiere pe masini unelte CNC, constructiilor sudate precum si in domeniul masurarii, controlului si analizelor tehnice.

Prelucram in conditii excelente diverse materiale, precum: inox, oteluri, aliate, aluminiu, alama, piese turnate si mase plastice tehnice - de la produse unicat la seriile de zeci, sute sau mii de piese ce sunt asimilate in fabricatie in timp scurt la aceeasi parametri calitativi, folosind propriul centru CNC.

Activitatea de printare 3D si de productie CNC se desfasoara in Cluj-Napoca (Romania), unde folosind utilaje de precizie CNC si avand o echipa experimentata, realizam la un inalt standard de calitate piese din bare rotunde, bare hexagonale, profile patrate sau rectangulare, profile L, T, I, U, tevi cu pereti subtiri/grosi, tevi sudate / de precizie etc.

Calitatea ridicata a pieselor prelucrate de noi pe strungurile si centrele verticale CNC, ne recomanda clientilor din industria auto, energetica, alimentara, automotive, farmaceutica, hidraulica si robotica din Romania, Germania, Austria, Olanda, Franta, Belgia.

VEZI MAI MULTE

PORTOFOLIU

DIN CATALOG

VEZI MAI MULTE

MASINI SI UTILAJE

Stratasys F370 CR

Imprimantele 3D din seria F123 CR oferă posibilitatea de a printa cu materiale termoplastice din fibră de carbon de calitate inginerească pentru a construi dispozitive de fixare, scule și piese puternice. Platforma deschisă a materialelor sporește versatilitatea aplicațiilor.

Varietatea materialelor compozitele de înaltă rezistență si termoplastice propietăți excepționale deblochează o gamă largă de aplicații inginerești, pe cea mai versatilă imprimantă 3D din clasa sa (ABS-M30, ASA, FDM TPU 92A, ABS-CF10, PC-ABS, DIRAN 410MF07, ABS-ESD7, FDM NYLON-CF10).

Dimensiunile de 355x254x355 mm si grosimile straturilor de 0.127/0.178/0.254/0.330 mm (in functie de material) sunt alte caracteristici de care ne folosim in asigurarea calitatii la nivelul cerut de clienti.

Hinowa Lightlift 17.75

17m working height, 7.5m outreach and 230kg load capacity throughout the working range.

Max Working Height: 17.06m
Travel Width: 0.79m
Weight: 2,230kg
Max Horizontal Outreach: 7.5m
Lift Capacity: 230kg
Power Source: Diesel, Lithium Battery, Petrol

CNC VictorTaichung - Model Vturn 45/125 Horizontal Turning Lathes

Even heavy cutting lathe with larger spindle for turning length from 1250mm to 4250mm.
Bar capacity 117.5mm, Vturn-40 Spindle speed 2000rpm.

Specifications

MACHINE CAPACITY

Swing over bed mm 780
Std. Turning dia. mm 520
Max. turning dia. mm 620 [580]
Center distance mm 1215
Hole through draw bar mm 117.5 (145 for LSB)

AXIS FEEDS

X axis travel: – Std turret mm 310+30
X axis travel: – VDI turret mm 125+315
X axis travel: – VDI turret, C-axis mm –
X axis travel: – BMT turret, C-axis mm 290+50
Z axis travel mm 1250
Y axis travel mm –
Rapid feed – X/Z axis m/min 20/20
Rapid feed – Y axis m/min –
Feed motor – X/Z axis kW 4 / 4
Feed motor – Y axis kW –
JOG feed rate mm/min 0~1260
Ball screw dia x pitch mm 32 x P8 (X) 50 x P10 (Z)

SPINDLE

Spindle nose (chuck) inch A2-11 (15”)
Max. spindle speed rpm 2000
Spindle motor power kW 30 / 37 With gearbox
Bearing inside dia. mm 190 (220 for LSB)
Spindle bore mm 135 (160 for LSB)

TURRET

No. of tools no. 10 (opt. 12) (12 for CM)
No. of live tools no. 6 (CV), 12 (CM)
Tool shank size mm 32
Curvic coupling dia. (mm) mm 320 [320]
Max. boring bar dia. mm 50 [BMT-75]
Exchange time (T-T) sec 1
Milling speed rpm 3000
Milling motor kW 7

TAILSTOCK

Quill dia. mm 150
Quill stroke mm 150
Quill taper – MT#5 (live)
OTHER
CNC controller (FANUC) – 0i-T
Tank capacity L. 600
Approx. machine size m 5.3 x 2.7 x 2.2
Net weight kg 10400 [11700]

Cosen AH-320H - Horizontal Dual Column Band Saws

Cosen H-type machines utilize hydraulic shuttle feed system, which offers extremely tight tolerances in both cutting repeatability and accuracy evenat high cutting rates.

These machines are built for high to extreme production needs.

Capacity Round 320 mm (12.6")
Capacity Square 320 mm (12.6")
Capacity Rectangle (HxW) 320 x 380 mm (12.6"x15")
Blade Speed 15-100 m/min (49.5-330 fpm)
Blade Size (LxWxT) 4240x34x1.1 (167"x1.3"x0.042")
Blade Motor 5HP (3.75kW)
Hydraulic Motor 1HP (0.75kW)
Coolant Motor 1/8HP (0.1kW)
Automatic Indexing Length 403 mm (15.9"), Max. 3627 mm (142.8")
Workbed Height 790 mm (31")
Gross Weight 1700 kgs (3740 lbs)
Floor Space (LxWxH) 2180x2200x1990 mm (85.8"x86.6"x78.3")

Vertical Machining Center Vcenter 205

Designed by following extensive research and feedback from numerous machine tool users, Victor's new Vcenter-205 has been designed with a long fixed table to provide multi-tasking machining precision with 30 m/min rapid traverse in all axes. The traveling column enables pendulum loading and machining in cycle to reduce
load/unload times and to maximize spindle utilization.

Travel
X axis travel mm 2050
Y axis travel mm 550
Z axis travel mm 560

Distance Spindle center to column mm 638
Spindle nose to table surface mm 180 ~ 740

Table
Table work area mm 2500 x 550
Dimension of T-slot mm 5 x 18 x 100
Max. table load kg 1200

Spindle
Spindle taper BT-40
Spindle motor - cont / 30 / 10 min kW 7.5 / 11 / 15 (opt. 15 / 18.5 / - )
Spindle speed rpm 12000

Feed rate
Rapid feed rate - X/Y/Z m/min 30 / 30 / 30
Axis feed motor - X/Y/Z kW 4 / 3 / 4
Cutting feedrate by table m/min 7.5 (opt. 10)
X ballscrew diameter mm 50
Y ballscrew diameter mm 40
Z ballscrew diameter mm 40
Linear guide width (X/Y/Z) mm 45 / 45 / 45

Tools
Max. tool length mm 350
Max. tool weight kg 8
Magazine capacity 24 disc (opt. 32, 40)

Max. tool diameter (without adjacent tools) mm ø80 (ø127)
Tool exchange time sec. 2.9 (T-T), 7.2 (C-C)
Pull stud angle deg. 15

Tool selection method Random
Machine
Power requirement kVA 40
Air pressure requirement kg/cm2 5.5 ~ 6.5
Coolant tank capacity L. 600
Std. NC controller Fanuc 0i-MD
Floor space requirement mm 5300 x 3430
Max. machine height mm 3045
Machine weight kg 9050

Electronic Tapping Machine VOLUMEC JT2500

Tapping Capacity M5-M24

KEY FEATURES:

- Adjustable speed from 20 to 200 rpm
- Working radius r = 1300 mm 360 °
- Electric Brushless Motor 220v
- Double-balanced articulated arm system made of special aluminum
- Standard multidirectional head
- Variation of the speed of rotation
- Low noise level
- Reduced consumption of electricity
- Balance and fluidity of movement guaranteed by gas springs and adjustable joints mounted on ball bearings.

Parweld XTM201i Multiprocess inverter

The Parweld XTM 201i is a lightweight 200A multi process MIG/MMA/Lift TIG welder with a range of features including quick setting synergic control, dual digital display and 2T/4T trigger latching.

The XTM201i mig inverter is designed for wire diameters 0.8mm to 1.0mm on 1kg (100mm) and 5kg (200mm) spools and will weld materials up to 4mm.

Technical Specifications:

Input Voltage (VAC): 230 +/- 10%
Output Range (MIG, A): 20 - 200
Duty Cycle (40°C):
25%:200 A, 23.0 V
60%:110 A, 19.0 V
100%:90 A, 18.1 V

Max. Input Power (kVA): 7,2
Open Circuit Voltage (VDC): 68
Dimensions (HxWxL, mm): 392 x 242 x 578
Net Weight (kg): 23
Standard Accessories: 3m Power Cable: (4 x 2.5 mm^2)
Accessories: 2m Ground Cable (16 mm^2)

VEZI MAI MULTE

Cum colaboram

OFERTARE RAPIDA

PLANIFICARE SI PROIECTARE

EXECUTIE SI CONTROLUL CALITATII

LIVRARE MARFA

CLIENTS

CLIENTI

constructii metalice, cnc, prelucrari mecanice mari, prelucrari mecanice mici, prelucrari mecanice orice material, centru cnc de precizie, calitate cnc, freza cnc, strung cnc, masini-unelte cnc, frezare cnc, strunjire cnc, frezare de precizie cnc, strunjire cnc, operator cnc, piese unicat, prelucrarilor prin aschiere, prelucrari mecanice, prelucrari inox, realizare matrite, realizare piese unicat, alvi technik, ali technik cluj, remus bogateanu, bogateanu remus, prelucrari mecanice alvi technik, strunjire cnc alvi technik, prelucrare cnc alvi technik, realizare piese unicat cnc, realizare piese inox, realizare piese aluminiu, realizare matrite, productie serii mici cnc, prelucrari mecanice de precizie, strunjiri cnc de precizie, frezari cnc de precizie, proiectare cnc, centru cnc cluj, piese bare rotunde, bare hexagonale, piese profile patrate, piese rectangulare, profile l, t, i, u, tevi cu pereti subtiri, tevi cu pereti grosi, tevi sudate de precizie, table debitate cu apa, table debitate laser, prelucrari prin aschiere, strunjire, frezare, gaurire, mortezare, sudura, utilaje moderne cnc, constructii metalice, prelucrari mecanice pe cnc-uri, sudura in aluminiu si inox, lacatuserie, proiectare, montaj mecanic, piese metalice grele, lucrari specializate la comanda. echipamente cnc moderne, structuri metalice din otel carbon, inox, servicii de sudura, prelucrari mecanice, slefuitorie si vopsitorie uz industrial, profile laminate, elemente si profile fier forjat, electroeroziune. frezare. polisare, lustruire suprafete. matrite. mentenanta, aschie forta de aschiere, adaos de prelucrare, scula aschietoare, prelucrari pe strunguri cu comanda numerica cnc, centru de prelucrare in 3 axe cnc, atelier cnc, unelte prelucrare metal, prelucrari mecanice, utilaje prelucrare metal, prelucrari roti dintate, confectii metalice, debitare table, prelucrari mecanice cluj napoca, prelucrari mecanice cluj, strunjire cluj, frezare cluj, CNC cluj, centru CNC cluj, prelucrari prin aschiere cluj, Productie CNC, Utilaje CNC, Strung CNC, Centru CNC, Prelucrari CNC, Prelucrari mecanice, Constructii sudate, Prelucrari prin aschiere, Alvi Technik SRL, Strunjire CNC de precizie, Frezare CNC de precizie

CONTACT

Head Office

Remus Bogateanu
E-mail: office@alvi-technik.com
Telefon: +4(0) 766-181.741
Adresa: 407055, Baciu, str. Transilvaniei, nr.12, Cluj-Napoca, Romania
CIF: RO 32630241
CUI: J12/14/2014

Cerere de oferta

Pentru mai multe informatii, va rugam sa ne contactati, fie telefonic la +4(0) 766-181.741 sau prin mail la office@alvi-technik.com.

Angajare

Daca sunteti in cautarea unui job si doriti sa faceti parte din echipa noastra, ori doriti sa faceti practica, va rugam sa ne trimiteti CV-ul dvs. la office@alvi-technik.com.